Eagle 1998-02 LS1/LS6 H-Beam Connecting Rods 6125B3D
-
Prompt and Speedy Delivery Available *Unless Special Order Item
-
100% ORIGINAL AND QUALITY
-
Backed by Manufacturer Warranty
INCLUDES ARP ROD BOLTS
Connecting Rod Length Center to Center (in): 6.125 in.
Free your engine's horsepower on the wings of Eagle ESP H-beam connecting rods. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, x-rayed, sonic-tested, magnafluxed, 100 percent machined, and shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models, and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 and 230,000 psi rated ARP 2000 rod bolts or 265,000 psi rated ARP L-19 bolts as upgrades. Instructions and rod bolt lubrication are included.
INCLUDES ARP ROD BOLTS
Connecting Rod Length Center to Center (in): 6.125 in.
Connecting Rod Beam Style: I-beam Connecting Rod Material: Forged 4340 steel Connecting Rod Finish: Shot-peened Wrist Pin Style: Floating Clearanced for Stroker: No Cap Retention Style: Cap screw Connecting Rod Bolt Brand: ARP Connecting Rod Bolt Diameter: 7/16 in. Connecting Rod Bolt Material: 8740 Chromoly steel Fastener Yield Strength (psi): 160,000 psi Connecting Rod Bolt Head Style: 12-point Approximate Connecting Rod Weight (g): 660 Rod Journal Diameter (in): 2.100 in. Big End Bore Diameter (in): 2.2250 in. Pin End Bore Diameter: 0.927 in. Advertised Horsepower Rating (hp): 700 hp Advertised RPM Rating: 7,500 rpm Weight Matched Set: Yes Remanufactured: No Balanced: No Magnafluxed: Yes Quantity: Sold as a set of 8. Notes: Custom pistons required when using longer than stock connecting rods.Free your engine's horsepower on the wings of Eagle ESP H-beam connecting rods. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, x-rayed, sonic-tested, magnafluxed, 100 percent machined, and shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models, and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 and 230,000 psi rated ARP 2000 rod bolts or 265,000 psi rated ARP L-19 bolts as upgrades. Instructions and rod bolt lubrication are included.