NOS Cheater Holley Dominator Flange Carb Kit w/10lb Bottle NOS Cheater Holley Dominator Flange Carb Kit w/10lb Bottle NOS The NOS Cheater system is designed for use on 350 CID or larger, carbureted engines. It uses large Nitrous and fuel solenoids and can be adjusted to any desired power level from 150 to 250 horsepower, in a matter of seconds. Cheater systems are easy to install and utilize a 1/2” thick injector plate which fits between the Carburetor and intake Manifold to provide ample hood clearance. These systems are available in both singlestage and dual–stage models. Dual stage models are best suited to those applications where full power cannot be applied at once, due to traction limitations. However, even greater control can be realized by using a NOS Progressive Nitrous Controller, shown elsewhere in this catalog. Cheater systems include a 10 lb. Nitrous bottle, four (4) stages of jets, aircraft–quality steel braided line and all other necessary electrical and mounting hardware for a complete installation. Each single Carburetor Cheater system includes Jet Pack #13725 that allows jetting to four (4) different horsepower levels: 150, 180, 210 and 250. Each multiple Carburetor Cheater system includes Jet Pack #13735 that allows jetting to four (4) different horsepower levels: 150, 175, 200 and 250. Cheater Nitrous System V8 Holley 4 bbl/Carter AFB (late) 150–250 HP with 10 lb. Bottle Installation Notes To supply the proper amount of fuel to the Carburetor and Cheater System, a fuel pump must be used that is designed to operate between 5 and 10 PSI, with a flow rate of 0.1 gallons per hour / horsepower at 6 PSI. For example, an engine that produces 450 horsepower when the Cheater System is activated will require a fuel pump that flows at least 45 gallons per hour at 6 PSI. This kit is available without a bottle (02002–NBNOS). Features Large Nitrous and Fuel Solenoids Adjusted In Matter Of Seconds Easy To Install Thin 0.5in. Injector Plate Ample Hood Clearance Includes Necessary Electrical Hardware Technical Information Instructions for Part# 02002NOS Bottle Notice for Part# 02002NOS

NOS Cheater Holley Dominator Flange Carb Kit w/10lb Bottle

Code: 02002NOS
$627.95
In Stock
Add to Wishlist Add to Compare
  • Prompt and Speedy Delivery Available *Unless Special Order Item

  • 100% ORIGINAL AND QUALITY

  • Backed by Manufacturer Warranty

The NOS Cheater system is designed for use on 350 CID or larger, carbureted engines. It uses large Nitrous and fuel solenoids and can be adjusted to any desired power level from 150 to 250 horsepower, in a matter of seconds. Cheater systems are easy to install and utilize a 1/2” thick injector plate which fits between the Carburetor and intake Manifold to provide ample hood clearance.
These systems are available in both singlestage and dual–stage models. Dual stage models are best suited to those applications where full power cannot be applied at once, due to traction limitations. However, even greater control can be realized by using a NOS Progressive Nitrous Controller, shown elsewhere in this catalog.
Cheater systems include a 10 lb. Nitrous bottle, four (4) stages of jets, aircraft–quality steel braided line and all other necessary electrical and mounting hardware for a complete installation. Each single Carburetor Cheater system includes Jet Pack #13725 that allows jetting to four (4) different horsepower levels: 150, 180, 210 and 250. Each multiple Carburetor Cheater system includes Jet Pack #13735 that allows jetting to four (4) different horsepower levels: 150, 175, 200 and 250.
Cheater Nitrous System V8 Holley 4 bbl/Carter AFB (late) 150–250 HP with 10 lb. Bottle

Installation Notes

To supply the proper amount of fuel to the Carburetor and Cheater System, a fuel pump must be used that is designed to operate between 5 and 10 PSI, with a flow rate of 0.1 gallons per hour / horsepower at 6 PSI. For example, an engine that produces 450 horsepower when the Cheater System is activated will require a fuel pump that flows at least 45 gallons per hour at 6 PSI.
This kit is available without a bottle (02002–NBNOS).

Features

  • Large Nitrous and Fuel Solenoids
  • Adjusted In Matter Of Seconds
  • Easy To Install
  • Thin 0.5in. Injector Plate
  • Ample Hood Clearance
  • Includes Necessary Electrical Hardware
The NOS Cheater system is designed for use on 350 CID or larger, carbureted engines. It uses large Nitrous and fuel solenoids and can be adjusted to any desired power level from 150 to 250 horsepower, in a matter of seconds. Cheater systems are easy to install and utilize a 1/2” thick injector plate which fits between the Carburetor and intake Manifold to provide ample hood clearance.
These systems are available in both singlestage and dual–stage models. Dual stage models are best suited to those applications where full power cannot be applied at once, due to traction limitations. However, even greater control can be realized by using a NOS Progressive Nitrous Controller, shown elsewhere in this catalog.
Cheater systems include a 10 lb. Nitrous bottle, four (4) stages of jets, aircraft–quality steel braided line and all other necessary electrical and mounting hardware for a complete installation. Each single Carburetor Cheater system includes Jet Pack #13725 that allows jetting to four (4) different horsepower levels: 150, 180, 210 and 250. Each multiple Carburetor Cheater system includes Jet Pack #13735 that allows jetting to four (4) different horsepower levels: 150, 175, 200 and 250.
Cheater Nitrous System V8 Holley 4 bbl/Carter AFB (late) 150–250 HP with 10 lb. Bottle
Installation Notes
To supply the proper amount of fuel to the Carburetor and Cheater System, a fuel pump must be used that is designed to operate between 5 and 10 PSI, with a flow rate of 0.1 gallons per hour / horsepower at 6 PSI. For example, an engine that produces 450 horsepower when the Cheater System is activated will require a fuel pump that flows at least 45 gallons per hour at 6 PSI.
This kit is available without a bottle (02002–NBNOS).

Features

  • Large Nitrous and Fuel Solenoids
  • Adjusted In Matter Of Seconds
  • Easy To Install
  • Thin 0.5in. Injector Plate
  • Ample Hood Clearance
  • Includes Necessary Electrical Hardware
Technical Information Instructions for Part# 02002NOS Bottle Notice for Part# 02002NOS