Ultimate 300M Inner Shafts Ultimate 300M Inner Shafts Spidertrax But what makes Spidertrax axles outperform the competition in ALL areas of quality, strength, and price? Here is a list of key advantages on what makes our axle shafts stand out from the crowd: We start with only the finest aerospace grade E4340 billet chromoly. The E stands for electric furnace (as opposed to a gas furnace which is more commonly used among our competitors) and yields superior results in heat treatment. We also carry out all CNC manufacturing operations right here, in-house, in Colorado USA. This allows us to provide an unmatched level of quality control while passing significant cost savings on to you. Unlike other Dana 60 axle shafts, our approach to a two-piece axle shaft design adds an incredible level of strength, durability, and machinability. To start, our two-piece yoke incorporates a unique, ringed web, design which connects and supports both ears securing the u-joint. This greatly minimizes deflection under load, providing a superior level of strength and durability to both the yoke and the u-joint. This ringed web also allows an axle shaft assembly to achieve un-heard-of steering angles, reaching a maximum steering angle of 50 degrees! This design approach also creates machine friendly parts, allowing us to maximize the speed of our in-house CNC machines to pass significant cost savings on to you. All heat treatment is done AFTER machining and never before. This provides far more strength than simply working with pre-heat treated material, rough cutting some splines, and calling it good. We turn down the entire shaft so the shaft diameter is smaller than the major diameter of the splines. This provides two key advantages. First, by choosing the correct shaft diameter we allow for an ideal amount of shaft torsion, critical for overall shaft longevity. Second, the axle shaft splines are protected from taking the full load on the shaft, in-turn making the splines much stronger. Anyone who has seen twisted splines on a shaft that has not been machined down like ours knows first hand what a difference this can make. If you're building a complete Spider 9 with Ultimate 60 Knuckles, we know exactly what components you're running and how they are all designed to work together. Therefore, we can make sure your shafts fit perfect in every way. We cover all critical areas, commonly missed by our competition, such as corrected adjustments in shaft length based on locker choice. When building you're Spider 9 axle, we make it easy to calculate your axle shaft lengths using an Excel spreadsheet called the "Spider 9 Housing & Shaft Calculator" in the link on the bottom of this page. All parts come with a "Limited Lifetime Warranty", so you are covered for life from defects in material and workmanship. For more details on the Limited Lifetime Warranty, please visit our Terms of Business page. You're dealing with the actual company manufacturing your axle shafts, so you're not at the mercy of uncontrollable overseas nonsense and make-believe lead times. All axle shaft orders placed in a single month are batched together and ready to ship by the end of the following month (if the end of the month falls on a weekend, it would be the Monday that follows). So, for example, an order placed on January 15th would be ready to ship by February 28th. An order placed on January 31st would also be ready to ship by February 28th and so on. When ordering your Spidertrax 35 Spline Ultimate Axle Shafts, please refer to the drawing below when entering in your measurements for options Sa and Sb. The unit of measurement is inch and this number should be keyed in using decimal format. An example: two shafts with length 34-1/2" and 15-3/8", Sa would be keyed in as 34.5 and Sb keyed in as 15.375. Option N is for spline count and we currently offer this option in 35 spline only. As mentioned above, we offer an Excel spreadsheet called the "Spider 9 Housing & Shaft Calculator" which makes it easy to figure out your shaft lengths when running Spider 9 components. This Excel spreadsheet can be downloaded in the link at the bottom of this page. Spidertrax 35 Spline Ultimate Axle Shafts are designed to be sealed using the Spidertrax High Performance Oil Seal Kit and intended to be installed in a Spider 9 housing with Spidertrax Ultimate 60 Knuckles. Please note that due to the size of the u-joint yoke these axle shafts will not fit in Dana 60 kingpin style knuckles. They are sold and priced as a pair. All aspects of these axle shafts, from design to manufacturing, are proudly done right here in Colorado, USA.

Ultimate 300M Inner Shafts

Code: AXLUD60M
$1,399.00
In Stock
Add to Wishlist Add to Compare
  • Prompt and Speedy Delivery Available *Unless Special Order Item

  • 100% ORIGINAL AND QUALITY

  • Backed by Manufacturer Warranty

But what makes Spidertrax axles outperform the competition in ALL areas of quality, strength, and price? Here is a list of key advantages on what makes our axle shafts stand out from the crowd:

    • We start with only the finest aerospace grade E4340 billet chromoly. The E stands for electric furnace (as opposed to a gas furnace which is more commonly used among our competitors) and yields superior results in heat treatment. We also carry out all CNC manufacturing operations right here, in-house, in Colorado USA. This allows us to provide an unmatched level of quality control while passing significant cost savings on to you.

    • Unlike other Dana 60 axle shafts, our approach to a two-piece axle shaft design adds an incredible level of strength, durability, and machinability. To start, our two-piece yoke incorporates a unique, ringed web, design which connects and supports both ears securing the u-joint. This greatly minimizes deflection under load, providing a superior level of strength and durability to both the yoke and the u-joint. This ringed web also allows an axle shaft assembly to achieve un-heard-of steering angles, reaching a maximum steering angle of 50 degrees! This design approach also creates machine friendly parts, allowing us to maximize the speed of our in-house CNC machines to pass significant cost savings on to you.

    • All heat treatment is done AFTER machining and never before. This provides far more strength than simply working with pre-heat treated material, rough cutting some splines, and calling it good.

    • We turn down the entire shaft so the shaft diameter is smaller than the major diameter of the splines. This provides two key advantages. First, by choosing the correct shaft diameter we allow for an ideal amount of shaft torsion, critical for overall shaft longevity. Second, the axle shaft splines are protected from taking the full load on the shaft, in-turn making the splines much stronger. Anyone who has seen twisted splines on a shaft that has not been machined down like ours knows first hand what a difference this can make.

    • If you're building a complete Spider 9 with Ultimate 60 Knuckles, we know exactly what components you're running and how they are all designed to work together. Therefore, we can make sure your shafts fit perfect in every way. We cover all critical areas, commonly missed by our competition, such as corrected adjustments in shaft length based on locker choice.

    • When building you're Spider 9 axle, we make it easy to calculate your axle shaft lengths using an Excel spreadsheet called the "Spider 9 Housing & Shaft Calculator" in the link on the bottom of this page.

    • All parts come with a "Limited Lifetime Warranty", so you are covered for life from defects in material and workmanship. For more details on the Limited Lifetime Warranty, please visit our Terms of Business page.

    • You're dealing with the actual company manufacturing your axle shafts, so you're not at the mercy of uncontrollable overseas nonsense and make-believe lead times. All axle shaft orders placed in a single month are batched together and ready to ship by the end of the following month (if the end of the month falls on a weekend, it would be the Monday that follows). So, for example, an order placed on January 15th would be ready to ship by February 28th. An order placed on January 31st would also be ready to ship by February 28th and so on.

When ordering your Spidertrax 35 Spline Ultimate Axle Shafts, please refer to the drawing below when entering in your measurements for options Sa and Sb. The unit of measurement is inch and this number should be keyed in using decimal format. An example: two shafts with length 34-1/2" and 15-3/8", Sa would be keyed in as 34.5 and Sb keyed in as 15.375. Option N is for spline count and we currently offer this option in 35 spline only.

As mentioned above, we offer an Excel spreadsheet called the "Spider 9 Housing & Shaft Calculator" which makes it easy to figure out your shaft lengths when running Spider 9 components. This Excel spreadsheet can be downloaded in the link at the bottom of this page. Spidertrax 35 Spline Ultimate Axle Shafts are designed to be sealed using the Spidertrax High Performance Oil Seal Kit and intended to be installed in a Spider 9 housing with Spidertrax Ultimate 60 Knuckles. Please note that due to the size of the u-joint yoke these axle shafts will not fit in Dana 60 kingpin style knuckles. They are sold and priced as a pair. All aspects of these axle shafts, from design to manufacturing, are proudly done right here in Colorado, USA.

But what makes Spidertrax axles outperform the competition in ALL areas of quality, strength, and price? Here is a list of key advantages on what makes our axle shafts stand out from the crowd:

    • We start with only the finest aerospace grade E4340 billet chromoly. The E stands for electric furnace (as opposed to a gas furnace which is more commonly used among our competitors) and yields superior results in heat treatment. We also carry out all CNC manufacturing operations right here, in-house, in Colorado USA. This allows us to provide an unmatched level of quality control while passing significant cost savings on to you.

    • Unlike other Dana 60 axle shafts, our approach to a two-piece axle shaft design adds an incredible level of strength, durability, and machinability. To start, our two-piece yoke incorporates a unique, ringed web, design which connects and supports both ears securing the u-joint. This greatly minimizes deflection under load, providing a superior level of strength and durability to both the yoke and the u-joint. This ringed web also allows an axle shaft assembly to achieve un-heard-of steering angles, reaching a maximum steering angle of 50 degrees! This design approach also creates machine friendly parts, allowing us to maximize the speed of our in-house CNC machines to pass significant cost savings on to you.

    • All heat treatment is done AFTER machining and never before. This provides far more strength than simply working with pre-heat treated material, rough cutting some splines, and calling it good.

    • We turn down the entire shaft so the shaft diameter is smaller than the major diameter of the splines. This provides two key advantages. First, by choosing the correct shaft diameter we allow for an ideal amount of shaft torsion, critical for overall shaft longevity. Second, the axle shaft splines are protected from taking the full load on the shaft, in-turn making the splines much stronger. Anyone who has seen twisted splines on a shaft that has not been machined down like ours knows first hand what a difference this can make.

    • If you're building a complete Spider 9 with Ultimate 60 Knuckles, we know exactly what components you're running and how they are all designed to work together. Therefore, we can make sure your shafts fit perfect in every way. We cover all critical areas, commonly missed by our competition, such as corrected adjustments in shaft length based on locker choice.

    • When building you're Spider 9 axle, we make it easy to calculate your axle shaft lengths using an Excel spreadsheet called the "Spider 9 Housing & Shaft Calculator" in the link on the bottom of this page.

    • All parts come with a "Limited Lifetime Warranty", so you are covered for life from defects in material and workmanship. For more details on the Limited Lifetime Warranty, please visit our Terms of Business page.

    • You're dealing with the actual company manufacturing your axle shafts, so you're not at the mercy of uncontrollable overseas nonsense and make-believe lead times. All axle shaft orders placed in a single month are batched together and ready to ship by the end of the following month (if the end of the month falls on a weekend, it would be the Monday that follows). So, for example, an order placed on January 15th would be ready to ship by February 28th. An order placed on January 31st would also be ready to ship by February 28th and so on.

When ordering your Spidertrax 35 Spline Ultimate Axle Shafts, please refer to the drawing below when entering in your measurements for options Sa and Sb. The unit of measurement is inch and this number should be keyed in using decimal format. An example: two shafts with length 34-1/2" and 15-3/8", Sa would be keyed in as 34.5 and Sb keyed in as 15.375. Option N is for spline count and we currently offer this option in 35 spline only.

As mentioned above, we offer an Excel spreadsheet called the "Spider 9 Housing & Shaft Calculator" which makes it easy to figure out your shaft lengths when running Spider 9 components. This Excel spreadsheet can be downloaded in the link at the bottom of this page. Spidertrax 35 Spline Ultimate Axle Shafts are designed to be sealed using the Spidertrax High Performance Oil Seal Kit and intended to be installed in a Spider 9 housing with Spidertrax Ultimate 60 Knuckles. Please note that due to the size of the u-joint yoke these axle shafts will not fit in Dana 60 kingpin style knuckles. They are sold and priced as a pair. All aspects of these axle shafts, from design to manufacturing, are proudly done right here in Colorado, USA.