'02 VORTEC W/ 4L60E STANDALONE WIRING HARNESS (DBW) '02 VORTEC W/ 4L60E STANDALONE WIRING HARNESS (DBW) PSI Conversions '02 VORTEC W/ 4L60E STANDALONE WIRING HARNESS (DBW) APPLICATION: 2002 VORTEC ENGINES (DRIVE BY WIRE ONLY) WITH 4L60E OR 4L80E TRANSMISSIONS. (NOTE THAT 2002 TRUCK HAS A 2 CONNECTOR THROTTLE BODY (SEE PICTURE). IF USING A SINGLE (8 PIN) CONNECTOR THROTTLE BODY USE PSI HARNESS, P/N HAR-1014. PARTS INCLUDED: Complete engine and transmission harness, Instruction Manual   Fuse/Relay Box Fuel Pump Control (Relay included) Fan controls (Relays available seperately KIT-1010) Check Engine Light, Speedo output, Tachometer, OBD2 Port Accelerator Pedal and Throttle Body MAF MAP Engine Coolant Temp Alternator (2) Upstream Oxygen Sensors Crankshaft Camshaft Fuel Injectors Coil Packs Automatic Transmission control Knock Sensors NOTES: These harnesses are designed for retrofitting 2002 Vortec engines (4.8, 5.3, 6.0) and 4L60E or 4L80E transmissions into older muscle cars and street rods or newer non-emissions controlled vehicles. Harness allows use of the factory Vortec intake manifold and multec injectors with flex-fuel injectors (EV6) optional. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with 4 - 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. All harnesses are 100% Quality Inspected prior to shipping. All harnesses require PCM VATs removal, available through  ADDITIONAL ITEMS REQUIRED: RED/BLUE PCM (SERVICE NUMBER 411 OR 896), PSI P/N PCM-1003.

'02 VORTEC W/ 4L60E STANDALONE WIRING HARNESS (DBW)

Code: HAR-1084
Sale
$649.99 $599.00
In Stock
Add to Wishlist Add to Compare
  • Prompt and Speedy Delivery Available *Unless Special Order Item

  • 100% ORIGINAL AND QUALITY

  • Backed by Manufacturer Warranty

'02 VORTEC W/ 4L60E STANDALONE WIRING HARNESS (DBW)

APPLICATION: 2002 VORTEC ENGINES (DRIVE BY WIRE ONLY) WITH 4L60E OR 4L80E TRANSMISSIONS. (NOTE THAT 2002 TRUCK HAS A 2 CONNECTOR THROTTLE BODY (SEE PICTURE). IF USING A SINGLE (8 PIN) CONNECTOR THROTTLE BODY USE PSI HARNESS, P/N HAR-1014.

PARTS INCLUDED: Complete engine and transmission harness, Instruction Manual

 

  • Fuse/Relay Box
  • Fuel Pump Control (Relay included)
  • Fan controls (Relays available seperately KIT-1010)
  • Check Engine Light, Speedo output, Tachometer, OBD2 Port
  • Accelerator Pedal and Throttle Body
  • MAF
  • MAP
  • Engine Coolant Temp
  • Alternator
  • (2) Upstream Oxygen Sensors
  • Crankshaft
  • Camshaft
  • Fuel Injectors
  • Coil Packs
  • Automatic Transmission control
  • Knock Sensors

NOTES: These harnesses are designed for retrofitting 2002 Vortec engines (4.8, 5.3, 6.0) and 4L60E or 4L80E transmissions into older muscle cars and street rods or newer non-emissions controlled vehicles. Harness allows use of the factory Vortec intake manifold and multec injectors with flex-fuel injectors (EV6) optional. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with 4 - 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation.

Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. All harnesses are 100% Quality Inspected prior to shipping. All harnesses require PCM VATs removal, available through 

ADDITIONAL ITEMS REQUIRED: RED/BLUE PCM (SERVICE NUMBER 411 OR 896), PSI P/N PCM-1003.

'02 VORTEC W/ 4L60E STANDALONE WIRING HARNESS (DBW)

APPLICATION: 2002 VORTEC ENGINES (DRIVE BY WIRE ONLY) WITH 4L60E OR 4L80E TRANSMISSIONS. (NOTE THAT 2002 TRUCK HAS A 2 CONNECTOR THROTTLE BODY (SEE PICTURE). IF USING A SINGLE (8 PIN) CONNECTOR THROTTLE BODY USE PSI HARNESS, P/N HAR-1014.

PARTS INCLUDED: Complete engine and transmission harness, Instruction Manual

 

  • Fuse/Relay Box
  • Fuel Pump Control (Relay included)
  • Fan controls (Relays available seperately KIT-1010)
  • Check Engine Light, Speedo output, Tachometer, OBD2 Port
  • Accelerator Pedal and Throttle Body
  • MAF
  • MAP
  • Engine Coolant Temp
  • Alternator
  • (2) Upstream Oxygen Sensors
  • Crankshaft
  • Camshaft
  • Fuel Injectors
  • Coil Packs
  • Automatic Transmission control
  • Knock Sensors

NOTES: These harnesses are designed for retrofitting 2002 Vortec engines (4.8, 5.3, 6.0) and 4L60E or 4L80E transmissions into older muscle cars and street rods or newer non-emissions controlled vehicles. Harness allows use of the factory Vortec intake manifold and multec injectors with flex-fuel injectors (EV6) optional. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with 4 - 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation.

Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. All harnesses are 100% Quality Inspected prior to shipping. All harnesses require PCM VATs removal, available through 

ADDITIONAL ITEMS REQUIRED: RED/BLUE PCM (SERVICE NUMBER 411 OR 896), PSI P/N PCM-1003.